CZ400 数控全自动PCB V-CUT切割机
功能说明:(最新产品)
同时生产4刀,进一步提升生产效率。
进一步全面完善自我保护、防呆功能。
Functionalinstruction:(new product)
and 4 knives,to further improve production efficiency.
further improve self-protection,dull-prevention function.
产品精度规格表
Product Precise Specification Sheet
项目 (Item) |
规格 (Spec) |
项目 (Item) |
规格 (Spec) |
刀数 Several knives |
4刀 4knives |
深度最大误差 The depth of maximum error |
±0.05mm |
最快速度 The fastest speed |
0~20m/分 0~20m/min |
定位最大误差 Positioning the maximum error |
±0.05mm |
最大加工面积 Processing area of the largest |
480mm*480mm |
上下刀对位最大误差 The biggest knife from top to bottom on the bit error |
±0.03mm |
最小加工面积 The minimum processing area |
90mm*90mm |
到板边最小距离 Minimum distance between the plateadge |
3mm |
投收料形式 Expectedto vete in the form of land |
全自动 Full-automatic |
使用电力 The electrical power used |
220V、1.5W |
送料形式 Form feed |
靠边模式 keep to the side mode |
外型尺寸 Overall dimensions |
L1.35m*W1.1m*H1.8m |
加工板厚 Processes the board thick |
0.4mm-2.00mm |
使用气压 The use of pressure |
5.5~6kg/cm² |
集尘流量要求 Dust flow requirements |
30m³/min |
集尘出口 Dust exporl |
(直径)110mm (Diameter)110mm |