產品展示
CHENG ZHONG
成盅實業有限公司
PRODUCTS CENTER
CZ236 数控全自动PCB V-CUT切割机
功能说明:
10″全触摸控制屏。
采用成盅全系列独有之全自动投收板模式及快捷控制系统。
速度、效率全面提升，最快达36/分钟X2刀。
跳刀功能精确高效。
自我保护功能全面升级。
Functionalinstruction:
10″touch control screen.
Adopt with Cheng Zhong particular automatic PCB board receiver and speed control system.
Speed and efficiently complete promoting,speed:36m/min x 2knife.
Knife function efficiently and accurately.
Self-protection function comprehensively upgraded.
产品精度规格表
Product Precise Specification Sheet
|
项目 (Item) |
规格 (Spec) |
项目 (Item) |
规格 (Spec) |
|
刀数 Several knives |
2刀 2knives |
深度最大误差 The depth of maximum error |
±0.05mm |
|
最快速度 The fastest speed |
36m/分 36m/min |
定位最大误差 Positioning the maximum error |
±0.05mm |
|
最大加工面积 Processing area of the largest |
480mm*480mm |
上下刀对位最大误差 The biggest knife from top to bottom on the bit error |
±0.03mm |
|
最小加工面积 The minimum processing area |
60mm*60mm |
到板边最小距离 Minimum distance between the plateadge |
2mm |
|
投收料形式 Expectedto vete in the form of land |
全自动 Full-automatic |
使用电力 The electrical power used |
AC220V、500W-900W |
|
送料形式 Form feed |
靠边模式 keep to the side mode |
外型尺寸 Overall dimensions |
L1.15m*W1.1m*H1.8m |
|
加工板厚 Processes the board thick |
0.4mm-2.0mm |
使用气压 The use of pressure |
5.5~6kg/cm² |
|
跳刀次数 Knife jumped munber |
单刀12次 12 times of single kinfe |
集尘流量要求 Dust flow requirements |
20~25m³/min |
成盅系列设备快捷操控面板特点：
